Equipment Specifications Library

Basic Model Information

  • Manufacturer:
    Vermeer
  • Model:
    D24x40a
  • Rig Size:
    20,001 - 30,000 lbs pullback

View Manufacturers View Models

Specifications

Entry Angle 18 degrees
Max Flow 38 GPM 143.9 LPM
Min Bore Diameter 3.5" 8.9 cm
Fuel Tank Capacity 35 gal 132.5 L
Length 10' 3.0 m
Ground Drive Speed 1 mph 1.6 km/h
Torque 4000 ft/lbs 5415 Nm
Width 79" 188 cm
Pipe Diameter 2.375" 6.0 m
Fuel Type Diesel
Max Pressure 2500 psi 172.4 bar
Weight 75 lbs 34 kg
Thrust 17900 lbs 8119.3 kg
Max Spindle Speed 262 RPM 262 RPM
Min Bend Radius 108.2' 33.0 m
Rod Carrying Capacity 500' 152.4m
Height 85" 216 cm
Max Spindle Torque 4000 ft/lbs 5423.3 Nm
Manufacturer's Gross HP Rating 125 hp 93.2 kw
Max Carriage Speed 60 ft/min 18.3 m/min
Pullback 23800 lbs 10795.5 kg
Hydraulic Tank Capacity 40 gal 151.4 L
Type FIRESTICK 1
Rod Loader Yes
Rated Engine RPM 2200 RPM 2200 RPM
Weight 17200 lbs 7801.8 kg
Length 203" 516 cm
Make and Model Cummins 4BTA3.9

Additional Info

-*2015*-

DIMENSIONS AND WEIGHTS
Weight: 17200 lbs (7801.8 kg)

ENGINE
Make and Model: Cummins 4BTA3.9
Fuel Type: Diesel
Maximum Engine RPM: 2200 rpm
Rated RPM: 2200 rpm
Gross Horsepower: 125 hp (93.2 kw)
Net Horsepower: 112.5 hp (83.9 kw)

OPERATIONAL
Thrust: 17900 lbs (8119.3 kg)
Pullback: 23800 lbs (10795.5 kg)
Maximum Carriage Speed at Maximum Engine RPM: 60 ft/min (18.3 m/min)
Maximum Spindle Torque (Low at Maximum Engine RPM): 4000 ft-lb (5423.3 Nm)
Maximum Spindle Torque (Medium at Maximum Engine RPM): 3000 ft-lb (4067.5 Nm)
Maximum Spindle Torque (High at Maximum Engine RPM): 1300 ft-lb (1762.6 Nm)
Maximum Spindle Speed at Max Engine RPM: 262 rpm
Minimum Bore Diameter: 3.5 " (8.9 cm)
Maximum Ground Drive Speed at Maximum Engine RPM: 1 mph (1.6 km/h)
Automated Rod Loader: Yes
Drill Rack Angle: 18 deg

FLUID CAPACITIES
Fuel Tank: 35 gal (132.5 L)
Engine Crankcase with Filter: 11.5 qt (10.9 L)
Hydraulic Tank: 40 gal (151 .4 L)

DRILLING FLUID SYSTEM
Maximum Flow: 38 gpm (143.9 L/min)
Maximum Pressure: 2500 psi (172.4 bar)

FEATURES
Breakout System: Yes- side load vise
Stakedown System: Yes- stationary

-*2001*-

DIMENSIONS
Length: 203" (516 cm)
Width: 79" (201 cm)
Height: 85" (216 cm)
Weight: 16,600 lbs. (7530 kg)
Hydraulic pipe vise: Yes - Power Vise
Transport speed: .75 mph (.56 km/h)
Rod loader: Yes
Stationary Stakedown system: Yes
Drilling lights: Yes
Integrated drill pipes: Yes
Automatic Linkage change-over switch: Yes

OPERATIONAL
Maximum spindle torque:
4000 ft-lb (5415 Nm) @ 131 RPM
3000 ft-lb (4061 Nm) @ 174 RPM
1300 ft-lb (1760 Nm) @ 262 RPM
Actual pullback: 23,800 lbs. (10, 796 kg)
Actual thrust: 17,900 lbs. (8119 kg)
Maximum spindle speed: 260 RPM
Electrical system: 12-volt DC

WATER SYSTEM
Maximum flow: 19/38 gpm (72/144 Lpm)
Maximum pressure: 1600/800 psi (110.3/55.2 bar)

POWER SOURCE
Engine: Cummins 4BTA3.9
Gross HP: 125 HP (93 kw)
Maximum governed speed: 2200 RPM

DRILL STEM
Type: Firestick I
One-piece forged design: Yes
Length: 10' (3.0 m)
Pipe diameter: 2.375" (6.0 m)
Minimum bend radius: 108.2' (33.0 m)
Weight: 75 lbs. (34 kg)
Firestick rod capacity: 500’ (152.4 m) [300’ (91.4 m) rod box with 200' (61.0 m) clip]

BORE
Minimum bore diameter: 3.5" (8.9 cm)
Drill head will accept most locator systems.

FLUID CAPACITIES
Hydraulic reservoir: 40 gal. (151 L)
Engine oil (including filter): 11.5 qt. (10.9 L)
Fuel tank: 35 gal. (132 L)

View Manufacturers View Models

This information is provided for informational purposes only. HDD Broker LLC cannot warrant the accuracy or completeness of this information. This information is subject to change by the manufacturer. Some specifications may vary by model year.

HDD Broker uses cookies and collects personal information on its websites.

To learn more, review HDD Broker's Privacy Policy and Cookie Policy. By clicking "I Accept", you indicate you have adjusted your browser settings to fit your preferences and consent to HDD Broker's use of cookies.

x