Equipment Specifications Library

Basic Model Information

  • Manufacturer:
    Vermeer
  • Model:
    D24A
  • Rig Size:
    20,001 - 30,000 lbs pullback

View Manufacturers View Models

Specifications

Width 35.5 in - 49 in 90.2 cm - 124 cm
Fuel Tank Capacity 40 gal 151 L
Rod Carrying Capacity 270' 82 m
Max Flow 14 gpm 53 L/min
Length 10 ft 3.04 m
Pullback 17900/23800 lbs 8119/10796 Kg
Length 180 in 457 cm
Weight 62 lbs 28.12 kg
Ground Drive Speed 0.9 mph 1.4 Km/h
Max Spindle Torque 2380/1320 ft-lb
Height 60 in 152 cm
Number of Cylinders 6
Make and Model Cummins 6BT 5.9
Fluid Tank 300 gal 1136 L
Weight 4500 lbs 2041 kg
Type Seamless Hot Roll
Manufacturer's Gross HP Rating 140 HP 104 kW
Fuel Type Diesel
Engine 140 HP Cummins 6BT 5.9 104 Kw
Thrust 17900/23800 lbs 8119/10796 Kg
Pipe Diameter 2.06 in 52.32 mm
Min Bore Diameter 3.5 in 8.9 cm
Joint Inside Diameter 0.875" 2.2 cm
Min Bend Radius 121.9' 37.1 m
Joint Diameter 2.250" 5.71 cm
Max Spindle Speed 169/300 RPM
Max Pressure 2000 psi 13.8 MPa

Additional Info

DRILL UNIT:
Length: 180"(457 cm)
Width: 35.5" - 49" (90.2 cm - 124 cm)
Height: 60" (152 cm)
Operating Weight: 4500 lbs (2041 kg)
5500 lbs (2495 kg) with 270' (82 m) of Rod
Hydraulic Pipe Vise: yes
Transport Speed: 0.9 mph (1.4 Km/h)
Rod Box on Rack: Yes - 270' (82 m)

OPERATIONAL
Maximum Spindle speed : 169/300 RPM
Maximum Spindle Torque : 2380/1320 ft-lb
Maximum HP Available To Reamer : 74.8 HP (55.8 Kw)
Actual Thrust and Pullback : 17900/23800 lbs (8119/10796 Kg)
Electical System : 12V DC

BORE SPECIFICATIONS
Bore Diameter: 3.5" (8.9 cm)
Maximum Backreamer Diameter compaction : 12" (30 cm)
Maximum Backreamer Diameter Cutting : 16" (41 cm)

POWER SOURCE
Engine: 140 HP (104 Kw) Cummins 6BT 5.9
Fuel Tank Capacity : 40 gal (151 L)

TRAILER
Width: 8.3' (25 m)
Overall Length: 22.8' (6.9 m)
Bed Length: 15.8' (4.8 m)
Electrical System: 12V DC
Coupler: 3" (8 cm)

LOAD RATING
GVWR: 22,000 lbs (9979 kg)
Axle Rating 10,000 lbs

WATER SYSTEM
Tank Capacity: 300 gal
Maximum Flow: 14gpm standard;38 gpm
Maximum Presure : 2000 PSI

DRILL ROD
One-piece Forged Desing: Yes
Length: 10'
Diameter: 2.06"
Weight:62 lbs

--ROD SIZE--
Forged/Inertia Weld: FORGED
Plain-End/Upset-end: N/A
Reference Tech. Spec.: API 5D
Pipe Body O.D.: 2.063" +/-0.031"
Wall Thickness:.240"
O.A.L. (S/S): 120.0" +/-0.250"
Bend Radius:121.9
Steel Chemistry: 4130
Type:Seamless Hot Roll.
Quench & Temper: S135
Tensile Strength:145,000 Min.
Yield Strength: 135 Min./165 Max.
Charpy 10x5:22 ft-lb Avg./19 Min.
Pipe & Upset Testing:Mag Particle
Inertia Weld Testing:N/A

--TOOL JOINTS--
Tool Joint O.D.:2.250"
Tool Joint I.D.:0.875"
Steel Chemistry:4130
Heat Treat:S135

--After Facing & Turning O.D.for Inertia Welding--
Weight:56 Lbs.

View Manufacturers View Models

This information is provided for informational purposes only. HDD Broker LLC cannot warrant the accuracy or completeness of this information. This information is subject to change by the manufacturer. Some specifications may vary by model year.

HDD Broker uses cookies and collects personal information on its websites.

To learn more, review HDD Broker's Privacy Policy and Cookie Policy. By clicking "I Accept", you indicate you have adjusted your browser settings to fit your preferences and consent to HDD Broker's use of cookies.

x