Equipment Specifications Library

Basic Model Information

  • Manufacturer:
    Ditch Witch
  • Model:
    3700

View Manufacturers View Models

Specifications

Height 86 in
Width 64 in
Engine Deutz F3L1011F
Length 155 in

Additional Info

DIMENSIONS
Angle of approach: 20°
Overhang beyond tire: 3.5 in
Height: 86 in
Length - transport: 155 in
Wheelbase: 48 in
Width: 64 in
Tread: 46 in

GENERAL
Ditch Witch model 3700 tractor, 4-wheel drive, rigid frame,
hydrostatic ground drive through rubber tires, 2-wheel power steering,
hydrostatic attachment drive, riding unit.

OPERATION
Vehicle speeds
Max. forward speed: 4.3 mph
Max. reverse speed: 1.7 mph
Max. digging chain speed @ 2500 rpm engine speed: 420 fpm
Vehicle clearance circle (SAE)
With front wheel steer: 28 ft
With rear wheel steer: 20 ft
Operating weight*: 4200 lb
Max. headshaft speed @ 2500 rpm engine: 210 rpm
Auger: single, tapered, with outboard support bearing
Max. diameter: 24 in
Min. diameter: 18 in
Length: 13 in
* Operating weight based on H313 attachment with shortest boom,
6 in (150 mm) wide chain, and 175 lb (79 kg) operator.
Backfill Blade
Blade width: 64 in
Blade height: 14 in
Lift height above ground: 12 in
Blade drop below ground: 8 in
Maximum swing angle (left/right): 28°
Tilt angle (up/down): 11°

POWER TRAIN
Ground drive transmission: hydrostatic drive infinitely variable from zero to max.,
foot pedal and hand lever operated speed /direction control.
Differentials: Dana model 44 (Dana model 60 optional)
Service brake: ground drive speed/direction control brakes machine
hydraulically when moved to neutral position.
Parking brake: Disc, hand operated
Tires: load rating at recommended pressure @ 10 mph (16 km/h)
Standard: 26 x 12.00-12,4-ply bar lug, 1780 lb @ 20 psi, 807 kg @ 1.4 bar
Optional: 29 x 12.50-15, 4-ply bar lug, 2255 lb @ 30 psi, 1022 kg @ 2.1 bar
Attachment drive transmission: hydrostatic, lever-operated speed infinitely variable
from zero to maximum forward with limited stroke reverse.

POWER
Engine: Deutz F3L1011F, air cooled diesel,
direct injection with individual cylinder injection pumps
Fuel: Diesel
Displacement: 125 cubic inches
Bore: 3.58 in
Stroke: 4.13 in
Engine gross power @ 3000 rpm: 45 hp
Max. governed speed as installed (no load): 2650 rpm
SAE net power @ 2500 rpm: 37.5 hp

HYDRAULIC SYSTEM
Ground drive pump capacity: 28.4 gpm
Ground drive pump relief pressure: 3750 psi
Attachment pump capacity: 28.4 gpm
Trencher chain pump relief pressure: 5000 psi
Plow and saw pump relief pressure: 3750 psi
Auxiliary pump capacity: 11 gpm
Auxiliary pump relief pressure: 2500 psi

FLUID CAPACITIES
Fuel tank: 13 gal
Engine oil (refill): 6 qt
Hydraulic reservoir: 9.5 gal
Hydraulic system: 13 gal

BATTERY
Group 26/26R/70, cold crank @ 0° F (-18°C), 500 amp - cranking amps @ 32°F (0°C), 700 amp

NOISE LEVEL
Operator 91 dbA sound pressure per ISO 6394
Exterior 106 dbA sound power per ISO 6393

View Manufacturers View Models

This information is provided for informational purposes only. HDD Broker LLC cannot warrant the accuracy or completeness of this information. This information is subject to change by the manufacturer. Some specifications may vary by model year.

HDD Broker uses cookies and collects personal information on its websites.

To learn more, review HDD Broker's Privacy Policy and Cookie Policy. By clicking "I Accept", you indicate you have adjusted your browser settings to fit your preferences and consent to HDD Broker's use of cookies.

x