Ang pahinang ito ay isinalin gamit ang Google Translate
Mga pagtutukoy ng kagamitan library
Pangunahing Impormasyon ng Modelo
-
Tagagawa:Morbark
-
Modelo:Morbark Beever M18RX
Tingnan ang Mga Tagagawa Tingnan ang Mga Modelo
Karagdagang impormasyon
GENERAL
Chipping Capacity: 18"
Height: 9'4"
Width: 7'8"
Length (Transport): 18'3"
Gross weight (approximate): 9,550 - 11,500 lbs.
Suspension: 10,000 lb. Torflex
Infeed Opening: 65" wide x 38" high
Throat Opening: 21-1/4" wide x 19" high
Drum: 23-1/2" wide x 373/8" diameter
Engines: CAT, Perkins, or GM
Horsepower: 147-174 HP
Fuel Capacity: 44 gallons
Hydraulic Capacity: 26 gallons
Frame: 8.2 lb., 6" channel
Tires: (2) 235/75 x 17-1/2"
Hitch: 2-1/2" Pintle
HIGHLIGHTS
-Four dual-edged knife staggered-pocket drum with removable knife holders, dual-sided, chambered air impeller system and controllable air flow vents
-Top 20-1/2" wide horizontal feed wheel equipped with serrated teeth and knife bars
-360° Manual crank swivel discharge with adjustable height and chip deflectors
-Live hydraulic system including: ball valve, pump, motor, and valve bank with additional pre-plumbed valve section for installation of an aftermarket winch package
-4" x 6" tubular steel fixed-length drawbar and 3/8" thick safety chains with clasp hooks
-Enclosed engine with gauge panel, radiator fines screen and slide rails for belt adjustment
ADDITIONAL FEATURES
Morthane Paint System: A chemically cured, electrostatically applied urethane coating with
high-gloss fnish, built-in UV protection, chip and chemical resistance and corrosion protection
OPTIONS
-ChipSafe Operator Safety Shield
-Winch package: heavy-duty, 5,000 lb. pull capacity with rope and 10' chafe guard
-Custom paint and logo packages
-Bottom Bump Bar
-Hydraulic Swivel Discharge
-Cone Holder
-Spare Tire/Mount
-Folding Infeed Tray
-Flow Control
-Axle, Fender and Battery Box Options Available
Chipping Capacity: 18"
Height: 9'4"
Width: 7'8"
Length (Transport): 18'3"
Gross weight (approximate): 9,550 - 11,500 lbs.
Suspension: 10,000 lb. Torflex
Infeed Opening: 65" wide x 38" high
Throat Opening: 21-1/4" wide x 19" high
Drum: 23-1/2" wide x 373/8" diameter
Engines: CAT, Perkins, or GM
Horsepower: 147-174 HP
Fuel Capacity: 44 gallons
Hydraulic Capacity: 26 gallons
Frame: 8.2 lb., 6" channel
Tires: (2) 235/75 x 17-1/2"
Hitch: 2-1/2" Pintle
HIGHLIGHTS
-Four dual-edged knife staggered-pocket drum with removable knife holders, dual-sided, chambered air impeller system and controllable air flow vents
-Top 20-1/2" wide horizontal feed wheel equipped with serrated teeth and knife bars
-360° Manual crank swivel discharge with adjustable height and chip deflectors
-Live hydraulic system including: ball valve, pump, motor, and valve bank with additional pre-plumbed valve section for installation of an aftermarket winch package
-4" x 6" tubular steel fixed-length drawbar and 3/8" thick safety chains with clasp hooks
-Enclosed engine with gauge panel, radiator fines screen and slide rails for belt adjustment
ADDITIONAL FEATURES
Morthane Paint System: A chemically cured, electrostatically applied urethane coating with
high-gloss fnish, built-in UV protection, chip and chemical resistance and corrosion protection
OPTIONS
-ChipSafe Operator Safety Shield
-Winch package: heavy-duty, 5,000 lb. pull capacity with rope and 10' chafe guard
-Custom paint and logo packages
-Bottom Bump Bar
-Hydraulic Swivel Discharge
-Cone Holder
-Spare Tire/Mount
-Folding Infeed Tray
-Flow Control
-Axle, Fender and Battery Box Options Available
Ang impormasyong ito ay ibinigay para sa mga layuning pang-impormasyon lamang. Ang HDD Broker, Inc. ay hindi maaaring matiyak ang katumpakan o pagkakumpleto ng impormasyong ito. Ang impormasyon na ito ay maaaring magbago sa pamamagitan ng tagagawa. Ang ilang mga pagtutukoy ay maaaring mag-iba sa pamamagitan ng taon ng modelo.